Trapezoid box width changes beyond bounds












4















I have made a flowchart in Tikz, where for the trapezoid (in/output) box I used the following command:



usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=blue!30]


The problem here is, I think, the text width parameter, because if I remove that the output box (see pictures) is fine, but the lines on the input are not wide enough. I call the output trapezoid as follows:



node (out1) [io, below of=pro3, yshift=-0.5cm, xshift=0.5] {Output result};


Resulting in an overly wide trapezoid, well beyond the required minimum of 3cm.



Changing the command to



node (out1) [io, below of=pro3, yshift=-0.5cm, xshift=0.5] {Output result\~};


i.e. adding a linebreak and a non-breaking space sets the width of the trapezoid correctly, but that now has a pointless empty line, which makes the text no longer vertically centred in the box.



How can I get this second trapezoid to be of the correct (3cm) width, without forcing an empty line into it?



MCVE:



documentclass[twoside]{report}
usepackage{mathrsfs,amsmath}
%%%%%%%%%% TIKZ OPTIONS %%%%%%%%%%%%%%
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
tikzstyle{startstop} = [rectangle, rounded corners, minimum width=3cm, minimum height=1cm,text centered, text width=3cm, draw=black, fill=red!30]
tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=blue!30]
tikzstyle{process} = [rectangle, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=orange!30]
tikzstyle{decision} = [diamond, minimum width=3cm, minimum height=1cm, text centered,draw=black, text width=2cm, fill=green!30]
tikzstyle{arrow} = [thick,->,>=stealth]
newcommand{vect}[1]{mathbf{#1}}
newcommand{matr}[1]{mathbf{#1}}
begin{document}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result};
end{tikzpicture}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result\~};
end{tikzpicture}

end{document}


I copied most of the code of this tutorial and tried to adapt it to my needs.



enter image description here



I am using TeXStudio 2.12.4 on Windows 7 with PdfLaTeX.



This is pdfTeX, Version 3.1415926-2.5-1.40.14 (MiKTeX 2.9 64-bit) (preloaded format=pdflatex 2018.3.14)









share|improve this question

























  • Are you looking for trapezium stretches=true?

    – marmot
    Nov 22 '18 at 13:04
















4















I have made a flowchart in Tikz, where for the trapezoid (in/output) box I used the following command:



usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=blue!30]


The problem here is, I think, the text width parameter, because if I remove that the output box (see pictures) is fine, but the lines on the input are not wide enough. I call the output trapezoid as follows:



node (out1) [io, below of=pro3, yshift=-0.5cm, xshift=0.5] {Output result};


Resulting in an overly wide trapezoid, well beyond the required minimum of 3cm.



Changing the command to



node (out1) [io, below of=pro3, yshift=-0.5cm, xshift=0.5] {Output result\~};


i.e. adding a linebreak and a non-breaking space sets the width of the trapezoid correctly, but that now has a pointless empty line, which makes the text no longer vertically centred in the box.



How can I get this second trapezoid to be of the correct (3cm) width, without forcing an empty line into it?



MCVE:



documentclass[twoside]{report}
usepackage{mathrsfs,amsmath}
%%%%%%%%%% TIKZ OPTIONS %%%%%%%%%%%%%%
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
tikzstyle{startstop} = [rectangle, rounded corners, minimum width=3cm, minimum height=1cm,text centered, text width=3cm, draw=black, fill=red!30]
tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=blue!30]
tikzstyle{process} = [rectangle, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=orange!30]
tikzstyle{decision} = [diamond, minimum width=3cm, minimum height=1cm, text centered,draw=black, text width=2cm, fill=green!30]
tikzstyle{arrow} = [thick,->,>=stealth]
newcommand{vect}[1]{mathbf{#1}}
newcommand{matr}[1]{mathbf{#1}}
begin{document}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result};
end{tikzpicture}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result\~};
end{tikzpicture}

end{document}


I copied most of the code of this tutorial and tried to adapt it to my needs.



enter image description here



I am using TeXStudio 2.12.4 on Windows 7 with PdfLaTeX.



This is pdfTeX, Version 3.1415926-2.5-1.40.14 (MiKTeX 2.9 64-bit) (preloaded format=pdflatex 2018.3.14)









share|improve this question

























  • Are you looking for trapezium stretches=true?

    – marmot
    Nov 22 '18 at 13:04














4












4








4








I have made a flowchart in Tikz, where for the trapezoid (in/output) box I used the following command:



usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=blue!30]


The problem here is, I think, the text width parameter, because if I remove that the output box (see pictures) is fine, but the lines on the input are not wide enough. I call the output trapezoid as follows:



node (out1) [io, below of=pro3, yshift=-0.5cm, xshift=0.5] {Output result};


Resulting in an overly wide trapezoid, well beyond the required minimum of 3cm.



Changing the command to



node (out1) [io, below of=pro3, yshift=-0.5cm, xshift=0.5] {Output result\~};


i.e. adding a linebreak and a non-breaking space sets the width of the trapezoid correctly, but that now has a pointless empty line, which makes the text no longer vertically centred in the box.



How can I get this second trapezoid to be of the correct (3cm) width, without forcing an empty line into it?



MCVE:



documentclass[twoside]{report}
usepackage{mathrsfs,amsmath}
%%%%%%%%%% TIKZ OPTIONS %%%%%%%%%%%%%%
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
tikzstyle{startstop} = [rectangle, rounded corners, minimum width=3cm, minimum height=1cm,text centered, text width=3cm, draw=black, fill=red!30]
tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=blue!30]
tikzstyle{process} = [rectangle, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=orange!30]
tikzstyle{decision} = [diamond, minimum width=3cm, minimum height=1cm, text centered,draw=black, text width=2cm, fill=green!30]
tikzstyle{arrow} = [thick,->,>=stealth]
newcommand{vect}[1]{mathbf{#1}}
newcommand{matr}[1]{mathbf{#1}}
begin{document}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result};
end{tikzpicture}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result\~};
end{tikzpicture}

end{document}


I copied most of the code of this tutorial and tried to adapt it to my needs.



enter image description here



I am using TeXStudio 2.12.4 on Windows 7 with PdfLaTeX.



This is pdfTeX, Version 3.1415926-2.5-1.40.14 (MiKTeX 2.9 64-bit) (preloaded format=pdflatex 2018.3.14)









share|improve this question
















I have made a flowchart in Tikz, where for the trapezoid (in/output) box I used the following command:



usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=blue!30]


The problem here is, I think, the text width parameter, because if I remove that the output box (see pictures) is fine, but the lines on the input are not wide enough. I call the output trapezoid as follows:



node (out1) [io, below of=pro3, yshift=-0.5cm, xshift=0.5] {Output result};


Resulting in an overly wide trapezoid, well beyond the required minimum of 3cm.



Changing the command to



node (out1) [io, below of=pro3, yshift=-0.5cm, xshift=0.5] {Output result\~};


i.e. adding a linebreak and a non-breaking space sets the width of the trapezoid correctly, but that now has a pointless empty line, which makes the text no longer vertically centred in the box.



How can I get this second trapezoid to be of the correct (3cm) width, without forcing an empty line into it?



MCVE:



documentclass[twoside]{report}
usepackage{mathrsfs,amsmath}
%%%%%%%%%% TIKZ OPTIONS %%%%%%%%%%%%%%
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
tikzstyle{startstop} = [rectangle, rounded corners, minimum width=3cm, minimum height=1cm,text centered, text width=3cm, draw=black, fill=red!30]
tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=blue!30]
tikzstyle{process} = [rectangle, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=orange!30]
tikzstyle{decision} = [diamond, minimum width=3cm, minimum height=1cm, text centered,draw=black, text width=2cm, fill=green!30]
tikzstyle{arrow} = [thick,->,>=stealth]
newcommand{vect}[1]{mathbf{#1}}
newcommand{matr}[1]{mathbf{#1}}
begin{document}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result};
end{tikzpicture}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result\~};
end{tikzpicture}

end{document}


I copied most of the code of this tutorial and tried to adapt it to my needs.



enter image description here



I am using TeXStudio 2.12.4 on Windows 7 with PdfLaTeX.



This is pdfTeX, Version 3.1415926-2.5-1.40.14 (MiKTeX 2.9 64-bit) (preloaded format=pdflatex 2018.3.14)






tikz-pgf pdftex miktex tikz-styles






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Nov 22 '18 at 14:29







Adriaan

















asked Nov 22 '18 at 12:36









AdriaanAdriaan

1235




1235













  • Are you looking for trapezium stretches=true?

    – marmot
    Nov 22 '18 at 13:04



















  • Are you looking for trapezium stretches=true?

    – marmot
    Nov 22 '18 at 13:04

















Are you looking for trapezium stretches=true?

– marmot
Nov 22 '18 at 13:04





Are you looking for trapezium stretches=true?

– marmot
Nov 22 '18 at 13:04










1 Answer
1






active

oldest

votes


















6














Just add trapezium stretches=true (and use tikzset instead of tikzstyle).



documentclass[twoside]{report}
usepackage{mathrsfs,amsmath}
%%%%%%%%%% TIKZ OPTIONS %%%%%%%%%%%%%%
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
tikzset{startstop/.style={rectangle, rounded corners, minimum width=3cm, minimum height=1cm,text centered, text width=3cm, draw=black, fill=red!30},
io/.style={trapezium, trapezium left angle=70, trapezium right angle=110,
minimum width=3cm, minimum height=1cm, text centered, text width=3cm,
draw=black, fill=blue!30,trapezium stretches=true}, %<- added
process/.style={rectangle, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=orange!30},
decision/.style={diamond, minimum width=3cm, minimum height=1cm, text
centered,draw=black, text width=2cm, fill=green!30},
arrow/.style={thick,->,>=stealth}}
newcommand{vect}[1]{mathbf{#1}}
newcommand{matr}[1]{mathbf{#1}}
begin{document}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result};
end{tikzpicture}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result\~};
end{tikzpicture}

end{document}


enter image description here






share|improve this answer
























  • Thanks! That helped. Out of curiosity, why does this help, and why can't I set streches in the tikzstyle, whereas it works in tikzset? Basically I just followed this tutorial and adapted that to my needs

    – Adriaan
    Nov 22 '18 at 13:12






  • 1





    @Adriaan You can use tikzstyle, i.e. tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=blue!30,trapezium stretches=true] works. However, it is recommended to switch to tikzset.

    – marmot
    Nov 22 '18 at 13:14











Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "85"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});














draft saved

draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f461269%2ftrapezoid-box-width-changes-beyond-bounds%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























1 Answer
1






active

oldest

votes








1 Answer
1






active

oldest

votes









active

oldest

votes






active

oldest

votes









6














Just add trapezium stretches=true (and use tikzset instead of tikzstyle).



documentclass[twoside]{report}
usepackage{mathrsfs,amsmath}
%%%%%%%%%% TIKZ OPTIONS %%%%%%%%%%%%%%
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
tikzset{startstop/.style={rectangle, rounded corners, minimum width=3cm, minimum height=1cm,text centered, text width=3cm, draw=black, fill=red!30},
io/.style={trapezium, trapezium left angle=70, trapezium right angle=110,
minimum width=3cm, minimum height=1cm, text centered, text width=3cm,
draw=black, fill=blue!30,trapezium stretches=true}, %<- added
process/.style={rectangle, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=orange!30},
decision/.style={diamond, minimum width=3cm, minimum height=1cm, text
centered,draw=black, text width=2cm, fill=green!30},
arrow/.style={thick,->,>=stealth}}
newcommand{vect}[1]{mathbf{#1}}
newcommand{matr}[1]{mathbf{#1}}
begin{document}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result};
end{tikzpicture}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result\~};
end{tikzpicture}

end{document}


enter image description here






share|improve this answer
























  • Thanks! That helped. Out of curiosity, why does this help, and why can't I set streches in the tikzstyle, whereas it works in tikzset? Basically I just followed this tutorial and adapted that to my needs

    – Adriaan
    Nov 22 '18 at 13:12






  • 1





    @Adriaan You can use tikzstyle, i.e. tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=blue!30,trapezium stretches=true] works. However, it is recommended to switch to tikzset.

    – marmot
    Nov 22 '18 at 13:14
















6














Just add trapezium stretches=true (and use tikzset instead of tikzstyle).



documentclass[twoside]{report}
usepackage{mathrsfs,amsmath}
%%%%%%%%%% TIKZ OPTIONS %%%%%%%%%%%%%%
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
tikzset{startstop/.style={rectangle, rounded corners, minimum width=3cm, minimum height=1cm,text centered, text width=3cm, draw=black, fill=red!30},
io/.style={trapezium, trapezium left angle=70, trapezium right angle=110,
minimum width=3cm, minimum height=1cm, text centered, text width=3cm,
draw=black, fill=blue!30,trapezium stretches=true}, %<- added
process/.style={rectangle, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=orange!30},
decision/.style={diamond, minimum width=3cm, minimum height=1cm, text
centered,draw=black, text width=2cm, fill=green!30},
arrow/.style={thick,->,>=stealth}}
newcommand{vect}[1]{mathbf{#1}}
newcommand{matr}[1]{mathbf{#1}}
begin{document}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result};
end{tikzpicture}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result\~};
end{tikzpicture}

end{document}


enter image description here






share|improve this answer
























  • Thanks! That helped. Out of curiosity, why does this help, and why can't I set streches in the tikzstyle, whereas it works in tikzset? Basically I just followed this tutorial and adapted that to my needs

    – Adriaan
    Nov 22 '18 at 13:12






  • 1





    @Adriaan You can use tikzstyle, i.e. tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=blue!30,trapezium stretches=true] works. However, it is recommended to switch to tikzset.

    – marmot
    Nov 22 '18 at 13:14














6












6








6







Just add trapezium stretches=true (and use tikzset instead of tikzstyle).



documentclass[twoside]{report}
usepackage{mathrsfs,amsmath}
%%%%%%%%%% TIKZ OPTIONS %%%%%%%%%%%%%%
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
tikzset{startstop/.style={rectangle, rounded corners, minimum width=3cm, minimum height=1cm,text centered, text width=3cm, draw=black, fill=red!30},
io/.style={trapezium, trapezium left angle=70, trapezium right angle=110,
minimum width=3cm, minimum height=1cm, text centered, text width=3cm,
draw=black, fill=blue!30,trapezium stretches=true}, %<- added
process/.style={rectangle, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=orange!30},
decision/.style={diamond, minimum width=3cm, minimum height=1cm, text
centered,draw=black, text width=2cm, fill=green!30},
arrow/.style={thick,->,>=stealth}}
newcommand{vect}[1]{mathbf{#1}}
newcommand{matr}[1]{mathbf{#1}}
begin{document}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result};
end{tikzpicture}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result\~};
end{tikzpicture}

end{document}


enter image description here






share|improve this answer













Just add trapezium stretches=true (and use tikzset instead of tikzstyle).



documentclass[twoside]{report}
usepackage{mathrsfs,amsmath}
%%%%%%%%%% TIKZ OPTIONS %%%%%%%%%%%%%%
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
tikzset{startstop/.style={rectangle, rounded corners, minimum width=3cm, minimum height=1cm,text centered, text width=3cm, draw=black, fill=red!30},
io/.style={trapezium, trapezium left angle=70, trapezium right angle=110,
minimum width=3cm, minimum height=1cm, text centered, text width=3cm,
draw=black, fill=blue!30,trapezium stretches=true}, %<- added
process/.style={rectangle, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=orange!30},
decision/.style={diamond, minimum width=3cm, minimum height=1cm, text
centered,draw=black, text width=2cm, fill=green!30},
arrow/.style={thick,->,>=stealth}}
newcommand{vect}[1]{mathbf{#1}}
newcommand{matr}[1]{mathbf{#1}}
begin{document}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result};
end{tikzpicture}

begin{tikzpicture}
node (in1) [io] {Input:\ $dt,nt,nx$ (scalars);\ $vect{x},vect{p}$ (vectors);\ $matr{p}$ (data)};
node (out1) [io, below of=in1, yshift=-0.5cm, xshift=0.5] {Output result\~};
end{tikzpicture}

end{document}


enter image description here







share|improve this answer












share|improve this answer



share|improve this answer










answered Nov 22 '18 at 13:08









marmotmarmot

93.2k4109204




93.2k4109204













  • Thanks! That helped. Out of curiosity, why does this help, and why can't I set streches in the tikzstyle, whereas it works in tikzset? Basically I just followed this tutorial and adapted that to my needs

    – Adriaan
    Nov 22 '18 at 13:12






  • 1





    @Adriaan You can use tikzstyle, i.e. tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=blue!30,trapezium stretches=true] works. However, it is recommended to switch to tikzset.

    – marmot
    Nov 22 '18 at 13:14



















  • Thanks! That helped. Out of curiosity, why does this help, and why can't I set streches in the tikzstyle, whereas it works in tikzset? Basically I just followed this tutorial and adapted that to my needs

    – Adriaan
    Nov 22 '18 at 13:12






  • 1





    @Adriaan You can use tikzstyle, i.e. tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=blue!30,trapezium stretches=true] works. However, it is recommended to switch to tikzset.

    – marmot
    Nov 22 '18 at 13:14

















Thanks! That helped. Out of curiosity, why does this help, and why can't I set streches in the tikzstyle, whereas it works in tikzset? Basically I just followed this tutorial and adapted that to my needs

– Adriaan
Nov 22 '18 at 13:12





Thanks! That helped. Out of curiosity, why does this help, and why can't I set streches in the tikzstyle, whereas it works in tikzset? Basically I just followed this tutorial and adapted that to my needs

– Adriaan
Nov 22 '18 at 13:12




1




1





@Adriaan You can use tikzstyle, i.e. tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=blue!30,trapezium stretches=true] works. However, it is recommended to switch to tikzset.

– marmot
Nov 22 '18 at 13:14





@Adriaan You can use tikzstyle, i.e. tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, text width=3cm, draw=black, fill=blue!30,trapezium stretches=true] works. However, it is recommended to switch to tikzset.

– marmot
Nov 22 '18 at 13:14


















draft saved

draft discarded




















































Thanks for contributing an answer to TeX - LaTeX Stack Exchange!


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f461269%2ftrapezoid-box-width-changes-beyond-bounds%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

404 Error Contact Form 7 ajax form submitting

How to know if a Active Directory user can login interactively

TypeError: fit_transform() missing 1 required positional argument: 'X'