Why does “Ethics and Operating Procedures” suggest tuning on a dummy load?
The seminal work "Ethics and Operating Procedures for the Radio Amateur" suggests in subsection II.8.1 to perform tuning only on a dummy load.
My understanding is that a dummy load matches the transceiver impedance so tuning is probably a) not necessary and b) without any predictive value for how the actual antenna will work with the tuning parameters.
What am I missing?
antenna equipment-operation
asked 4 hours ago
xmjx
1083
New contributor
xmjx is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
The seminal work "Ethics and Operating Procedures for the Radio Amateur" suggests in subsection II.8.1 to perform tuning only on a dummy load.
My understanding is that a dummy load matches the transceiver impedance so tuning is probably a) not necessary and b) without any predictive value for how the actual antenna will work with the tuning parameters.
What am I missing?
antenna equipment-operation
asked 4 hours ago
xmjx
1083
New contributor
xmjx is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
The seminal work "Ethics and Operating Procedures for the Radio Amateur" suggests in subsection II.8.1 to perform tuning only on a dummy load.
My understanding is that a dummy load matches the transceiver impedance so tuning is probably a) not necessary and b) without any predictive value for how the actual antenna will work with the tuning parameters.
What am I missing?
antenna equipment-operation
asked 4 hours ago
xmjx
1083
New contributor
xmjx is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
The seminal work "Ethics and Operating Procedures for the Radio Amateur" suggests in subsection II.8.1 to perform tuning only on a dummy load.
My understanding is that a dummy load matches the transceiver impedance so tuning is probably a) not necessary and b) without any predictive value for how the actual antenna will work with the tuning parameters.
What am I missing?
antenna equipment-operation
antenna equipment-operation
asked 4 hours ago
xmjx
1083
New contributor
xmjx is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 4 hours ago
xmjx
1083
New contributor
xmjx is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 4 hours ago
xmjx
1083
New contributor
xmjx is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 4 hours ago
xmjx
1083
asked 4 hours ago
xmjx
1083
1083
New contributor
xmjx is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
xmjx is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
xmjx is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
The text you refer to seems to be (emphasis mine):
Sometimes before transmitting it is necessary to tune (adjust) the transmitter (or antenna tuner). Tuning should in the first instance be done on a dummy load.
This is not referring to the use of an antenna tuner, whether integral or external. Rather, it is referring to tuning the "finals" of a vacuum-tube-based transmitter. These are also impedance-matching adjustments, but involve elements internal to the transmitter rather than exclusively the transmitter to the antenna. (The antenna impedance was also involved, so in some radios there could be some amount of antenna matching, if not as much as a dedicated antenna tuner. Or so I understand — I'm not an expert on this bit of history.)
Solid-state radios operate differently and do not require these adjustments, so the recommendation you read is obsolete. However, there are still uses for transmitting into a dummy load — for example, checking if your microphone is working, you're not over-modulating, or even that a computer-controlled transmission is correctly controlling your radio's frequency and PTT.
answered 4 hours ago
Kevin Reid AG6YO♦
15.5k32965
That makes sense. Thank you :-)
– xmjx
3 hours ago
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
});
});
}, "mathjax-editing");
StackExchange.ifUsing("editor", function () {
return StackExchange.using("schematics", function () {
StackExchange.schematics.init();
});
}, "cicuitlab");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "520"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
xmjx is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fham.stackexchange.com%2fquestions%2f12539%2fwhy-does-ethics-and-operating-procedures-suggest-tuning-on-a-dummy-load%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
The text you refer to seems to be (emphasis mine):
Sometimes before transmitting it is necessary to tune (adjust) the transmitter (or antenna tuner). Tuning should in the first instance be done on a dummy load.
This is not referring to the use of an antenna tuner, whether integral or external. Rather, it is referring to tuning the "finals" of a vacuum-tube-based transmitter. These are also impedance-matching adjustments, but involve elements internal to the transmitter rather than exclusively the transmitter to the antenna. (The antenna impedance was also involved, so in some radios there could be some amount of antenna matching, if not as much as a dedicated antenna tuner. Or so I understand — I'm not an expert on this bit of history.)
Solid-state radios operate differently and do not require these adjustments, so the recommendation you read is obsolete. However, there are still uses for transmitting into a dummy load — for example, checking if your microphone is working, you're not over-modulating, or even that a computer-controlled transmission is correctly controlling your radio's frequency and PTT.
answered 4 hours ago
Kevin Reid AG6YO♦
15.5k32965
That makes sense. Thank you :-)
– xmjx
3 hours ago
add a comment |
The text you refer to seems to be (emphasis mine):
Sometimes before transmitting it is necessary to tune (adjust) the transmitter (or antenna tuner). Tuning should in the first instance be done on a dummy load.
This is not referring to the use of an antenna tuner, whether integral or external. Rather, it is referring to tuning the "finals" of a vacuum-tube-based transmitter. These are also impedance-matching adjustments, but involve elements internal to the transmitter rather than exclusively the transmitter to the antenna. (The antenna impedance was also involved, so in some radios there could be some amount of antenna matching, if not as much as a dedicated antenna tuner. Or so I understand — I'm not an expert on this bit of history.)
Solid-state radios operate differently and do not require these adjustments, so the recommendation you read is obsolete. However, there are still uses for transmitting into a dummy load — for example, checking if your microphone is working, you're not over-modulating, or even that a computer-controlled transmission is correctly controlling your radio's frequency and PTT.
answered 4 hours ago
Kevin Reid AG6YO♦
15.5k32965
That makes sense. Thank you :-)
– xmjx
3 hours ago
add a comment |
The text you refer to seems to be (emphasis mine):
Sometimes before transmitting it is necessary to tune (adjust) the transmitter (or antenna tuner). Tuning should in the first instance be done on a dummy load.
This is not referring to the use of an antenna tuner, whether integral or external. Rather, it is referring to tuning the "finals" of a vacuum-tube-based transmitter. These are also impedance-matching adjustments, but involve elements internal to the transmitter rather than exclusively the transmitter to the antenna. (The antenna impedance was also involved, so in some radios there could be some amount of antenna matching, if not as much as a dedicated antenna tuner. Or so I understand — I'm not an expert on this bit of history.)
Solid-state radios operate differently and do not require these adjustments, so the recommendation you read is obsolete. However, there are still uses for transmitting into a dummy load — for example, checking if your microphone is working, you're not over-modulating, or even that a computer-controlled transmission is correctly controlling your radio's frequency and PTT.
answered 4 hours ago
Kevin Reid AG6YO♦
15.5k32965
The text you refer to seems to be (emphasis mine):
Sometimes before transmitting it is necessary to tune (adjust) the transmitter (or antenna tuner). Tuning should in the first instance be done on a dummy load.
This is not referring to the use of an antenna tuner, whether integral or external. Rather, it is referring to tuning the "finals" of a vacuum-tube-based transmitter. These are also impedance-matching adjustments, but involve elements internal to the transmitter rather than exclusively the transmitter to the antenna. (The antenna impedance was also involved, so in some radios there could be some amount of antenna matching, if not as much as a dedicated antenna tuner. Or so I understand — I'm not an expert on this bit of history.)
Solid-state radios operate differently and do not require these adjustments, so the recommendation you read is obsolete. However, there are still uses for transmitting into a dummy load — for example, checking if your microphone is working, you're not over-modulating, or even that a computer-controlled transmission is correctly controlling your radio's frequency and PTT.
answered 4 hours ago
Kevin Reid AG6YO♦
15.5k32965
answered 4 hours ago
Kevin Reid AG6YO♦
15.5k32965
answered 4 hours ago
Kevin Reid AG6YO♦
15.5k32965
answered 4 hours ago
Kevin Reid AG6YO♦
15.5k32965
15.5k32965
That makes sense. Thank you :-)
– xmjx
3 hours ago
add a comment |
That makes sense. Thank you :-)
– xmjx
3 hours ago
That makes sense. Thank you :-)
– xmjx
3 hours ago
That makes sense. Thank you :-)
– xmjx
3 hours ago
add a comment |
xmjx is a new contributor. Be nice, and check out our Code of Conduct.
xmjx is a new contributor. Be nice, and check out our Code of Conduct.
xmjx is a new contributor. Be nice, and check out our Code of Conduct.
xmjx is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Amateur Radio Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fham.stackexchange.com%2fquestions%2f12539%2fwhy-does-ethics-and-operating-procedures-suggest-tuning-on-a-dummy-load%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
